User manual

23 ARK-4180 User Manual
Chapter 3 BIOS Settings
 Swap Floppy Drive [Disabled]
This item enables users to swap floppy “A” and “B” without changing hardware cable
connection.
 Boot Up Floppy Seek [Disabled]
When enabled, the BIOS will perform a one time seek for floppy drive “A”.
 Boot Up NumLock Status [Disabled]
This item enables users to activate the Number Lock function upon system boot.
 Typematic Rate Setting
This item enables users to set the two typematic controls items.
This field controls the speed at
– Typematic Rate (Chars/Sec)
This item controls the speed at system registers repeated keystrokes.
Eight settings are: 6, 8, 10, 12, 15, 20, 24 and 30.
– Typematic Delay (Msec)
This item sets the time interval for displaying the first and second characters.
Four delay rate options are 250, 500, 750 and 1000.
 Security Option [Setup]
– System
System can not boot and can not access Setup page if the correct password
is not entered at the prompt.
– Setup
System will boot, but access to Setup only if the correct password is not
entered at the prompt. (Default value)
 MPS Version Control for OS [1.4]
This item sets the operating system multiprocessor support version.
 OS Select For DRAM > 64M [Non-OS2]
Select OS/2 only if system is running OS/2 operating system with greater than 64MB
of RAM on the system.
 Video BIOS Shadow [Enabled]
The Enabled setting copies Video BIOS to shadow RAM to improve performance.
 Full Screen Logo Show [Enabled]
Show full screen logo during post stage, and the Logo picture can be customized.
 Small Logo (EPA) Show [Enabled]
Show EPA logo during system post stage.
LAN Select boot device priority by LAN.
Disabled Disable this boot function.