User manual

ARK-3389 User Manual 10

2.2.4 LCD Backlight On/Off control Connector

The ARK-3389 comes with a D-Sub 9-pin connector which provides a

BKLTEN signal as well as +12V, +5V and Ground Pin signals that allow

applicants to connect these signals to LCD Inverter to implement the

LCD On/Off control.

• Provides BKLTEN signals that inverter Module requires for controlling

the on/off

• Provides 12V, 5V as the Inverter Power Source

The additional VBR signal pin could be connected to LCD’s Inverter

which allows users to implement brightness adjustment through cus-

tomer’s software utility.

9 LVDS_YAP3 22 LVDS_YBM0

10 LVDS_YBP0 23 LVDS_YBM1

11 LVDS_YBP1 24 LVDS_YBM2

12 LVDS_YBP2 25 LVDS_YBM3

13 LVDS_YBP3 26 GND

Table 2.2: LCD Backlight On/Off control Connector

Pin Pin name

1 +12V

2GND

3 BKLTEN

4 VBR

5+5V

6 LVDS_DCLK

7 LVDS_DDAT

8 Reserved

9 Reserved

324