User manual

AIM-3383 User Manual 66
4.7.1 ACPI function
The choice: Enabled, Disabled.
4.7.2 ACPI Suspend Type
This field is used to select the type of Suspend mode. The setup options
are:
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
4.7.3 Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if the
“ACPI Suspend Type” field is set to “S3(STR)” or “S1&S3” The setup
options are “Auto”, “Yes”, and “No”. The default setup value is “Auto”.
4.7.4 Power Management
This category allows you to select the type (or degree) of power saving
and is directly related to the following modes:
1. HDD Power Down
2. Suspend Mode
There are four selections for Power Management, three of which have
fixed mode settings
4.7.5 Video Off In Suspend
When the system is in suspend, video will turn off.
4.7.6 Video Off in Suspend
This field is used to activate the video off feature when the system enters
Suspend mode.
Min. Power Saving
Power Saving
Minimum power management., Suspend Mode =
1 hr., and HDD Power Down = 15 min.
Max. Power Saving Maximum power management., Suspend Mode
= 1 min., and HDD Power Down = 1 min.
User Defined (Default) Allows you to set each mode individually. When
not disabled, each of the ranges are from 1 min.
to 1 hr. except for HDD Power Down which
ranges from 1 min. to 15 min., and disable.