User manual

61 Chapter 4
4.6.13 Init Display First
This item allows you to choose which one to activate first, PCI Slot or on-
chip VGA. The choices: PCI Slot, Onboard/AGP.
4.6.14 Super IO Device
Move the cursor to this field and press <Enter>. The following screen
will appear.
Figure 4.9: Super IO Device
The screen shown above lists all the fields available in the “Super IO
Device” submenu. In the actual CMOS setup, you have to use the scroll
bar to view the fields. The settings on the screen are for reference only.
Your version may not be identical to this one.
4.6.15 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk drives to
the onboard floppy disk drive connector instead of a separate controller
card. If you want to use a different controller card to connect the floppy
disk drives, set this field to Disabled. Note: ARK-3383 series embedded
box computer does not support FDC interface connection.