User manual

AIMB-767 User Manual 12
2.1 Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove a card to gain access to all the connec-
tions.
2.2 Parallel Port (LPT1)
The parallel port is normally used to connect the motherboard to a printer. The AIMB-
767 includes an onboard parallel port, accessed through a 26-pin connector.
Note! The parallel cable is not enclosed in the box as a standard accessory.
The order part number is 1700008809.
LPT1