User manual

ACP-4362/4360 User Manual viii
Chapter 4 SATA HDD Backplane, Alarm and
RAID Application............................... 27
4.1 SATA HDD Backplane Layout ................................................................ 28
4.2 SATA HDD Backplane Specifications..................................................... 29
4.2.1 Connectors & Pin Definitions for SATA & RAID Related............ 29
Table 4.1: Mobile SATA HDD connectors and LEDs, front side 29
Table 4.2: SATA cable connectors, rear side............................ 29
Table 4.3: PWR1~PWR3, Power connectors............................ 29
Table 4.4: CN1, SATA RAID card connector
(only for ACP-4362).................................................. 29
Table 4.5: JP2, Power and status LED connector for
mobile SATA HDD (only for ACP-4362)................... 29
Table 4.6: JP3, Reserved firmware connector
(only for ACP-4362).................................................. 29
4.2.2 Connectors & Pin Definition for Alarm Specifications................. 30
Table 4.7: CN2, Alarm reset connector (only for ACP-4362) .... 30
Table 4.8: CN3, Second thermal sensor connector
(only for ACP-4362).................................................. 30
Table 4.9: CN4, Third thermal sensor connector ...................... 30
Table 4.10:CN5, Output connector to LED board
(only for ACP-4362).................................................. 30
Table 4.11:CN6, Voltage detection input connector
(only for ACP-4362).................................................. 30
Table 4.12:CN7, Power fail input (only for ACP-4362)............... 30
Table 4.13:JP1, Buzzer jumper (only for ACP-4362) ................. 30
Table 4.14:JP4, HDD LED connector (only for ACP-4362)........ 30
Table 4.15:FAN1~FAN4, Fan connectors
(ACP-4360 only has FAN3 & FAN4) ........................ 30
Table 4.16:FAN5, Reserved fan connector detecting speed
of the 3rd to 7th fan .................................................. 31
4.2.3 Jumper and Switch Settings ....................................................... 31
Table 4.17:SW2, Thermal sensor number setting
(only for ACP-4362).................................................. 31
Table 4.18:SW1, Fan number setting (only for ACP-4362)........ 31
Table 4.19:JP1, Buzzer jumper (only for ACP-4362) ................. 32
4.3 SATA HDD Cage .................................................................................... 32
4.4 RAID Application..................................................................................... 32
Chapter 5 Alarm Board ...................................... 33
5.1 Alarm Board Layout ................................................................................ 34
5.2 Alarm Board Specifications..................................................................... 34
5.2.1 Connectors, Jumpers and Pin Definitions................................... 35
Table 5.1: CN1, Auxiliary external power connector,
standard mini 4-Pin power connector....................... 35
Table 5.2: CN4, Thermal sensor (LM75) connector .................. 35
Table 5.3: CN13, Voltage detection input connector................. 35
Table 5.4: CN16, Power good input connector ......................... 35
Table 5.5: CN17, Alarm reset connector ................................... 35
Table 5.6: CN18, Output connector to LED board .................... 35
Table 5.7: CN26, External HDD LED connector ....................... 35
Table 5.8: FAN1~FAN7, Fan connectors .................................. 35
Table 5.9: J1, External buzzer................................................... 36
Table 5.10:SW1, Fan number select switch............................... 36
5.2.2 Switch Settings ........................................................................... 36
Table 5.11:SW1, Fan number setting......................................... 36
5.3 Thermal Sensor ...................................................................................... 37