User manual

ACP-4362/4360 User Manual 30
4.2.2 Connectors & Pin Definition for Alarm Specifications
Table 4.7: CN2, Alarm reset connector (only for ACP-4362)
Pin 1 ALARM RESET Pin 2 GND
Table 4.8: CN3, Second thermal sensor connector (only for ACP-4362)
Pin 1 VTIN Pin 2 A_G
Table 4.9: CN4, Third thermal sensor connector
Pin 1 VTIN Pin 2 A_G
Table 4.10: CN5, Output connector to LED board (only for ACP-4362)
Pin 1 GND Pin 9 Temperature Good
Pin 2 +5 V signal Pin 10 Temperature Fail
Pin 3 +12 V signal Pin 11 FAN Good
Pin 4 -5 V signal Pin 12 FAN Fail
Pin 5 -12 V signal Pin 13 N/A
Pin 6 HDD_1 Pin 14 +3.3 V signal
Pin 7 Power Good Pin 15 +5 Vsb signal
Pin 8 Power Fail
Table 4.11: CN6, Voltage detection input connector (only for ACP-4362)
Pin 1 +5 Vsb Pin 5 +5 V
Pin 2 GND Pin 6 +3.3 V
Pin 3 GND Pin 7 -12 V
Pin 4 -5 V Pin 8 +12 V
Table 4.12: CN7, Power fail input (only for ACP-4362)
Pin 1 GND Pin 2 Power Fail
Table 4.13: JP1, Buzzer jumper (only for ACP-4362)
Pin 1 Buzzer Pin 2 GND
Table 4.14: JP4, HDD LED connector (only for ACP-4362)
Pin 1 VCC Pin 2 HLED_ACT
Table 4.15: FAN1~FAN4, Fan connectors (ACP-4360 only has FAN3 &
FAN4)
Pin 1 GND Pin3 FAN_DEC
Pin 2 +12 V