User manual

ACP-4362/4360 User Manual 8
The following procedures instruct users to install the backplane/motherboard, add-on
cards, and disk drives into the ACP-4362 / 4360 chassis. Please refer to Appendix A,
Exploded Diagram, for all the detailed parts of ACP-4362 / 4360.
2.1 Removing the Top Cover
To remove the cover of ACP-4362 / 4360, please proceed as below.
1. Loosen two thumb screws on the rear of the top cover.
2. Pull the chassis top cover backwards and then lift it up.
Figure 2.1 Removing the top cover
Note! Use caution when installing or operating the components with the chas-
sis open. Be sure to turn off the power, unplug the power cord and
ground yourself by touching the metal chassis before you handle any
components inside the machine.