User manual

ACP-4010 User Manual x

3.4 Cleaning the Filters ......................................................... 20

Figure 3.6 Replacing the filters................................ 20

3.5 Replacing the Power Supply .......................................... 21

3.5.1 Replacing the Single PS/2 Power Supply ..................... 21

Figure 3.7 Replacing the single power supply......... 21

3.5.2 Replacing the Redundant Power Supply Module......... 21

Figure 3.8 Replacing the power supply module ...... 22

Figure 3.9 Power cord plugs orientation on the socket

Chapter 4 Alarm Module.................................................24

4.1 Alarm Board Layout........................................................ 24

Figure 4.1 Alarm board layout................................. 24

4.2 Alarm Board Specifications ............................................ 24

4.2.1 Connectors, Jumper and Pin Definition........................ 25

Table 4.1 CN1, Auxiliary external power connector,

standard mini 4-Pin power connector .. 25

Table 4.2 CN4, Thermal sensor (LM75) connector 25

Table 4.3 CN13, Voltage detection input connector ..

Table 4.4 CN16, Power good input connector ....... 25

Table 4.5 CN17, Alarm reset connector ................. 25

Table 4.6 CN18, Output connector to LED board.. 26

Table 4.7 CN26, External HDD LED connector.... 26

Table 4.8 FAN1~FAN7, Fan connectors................ 26

Table 4.9 J1. External Buzzer................................. 26

Table 4.10 SW1, Fan number select switch ............. 26

4.2.2 Switch Settings ............................................................. 27

Table 4.11 SW1, Fan number setting ....................... 27

4.3 Thermal Sensor ............................................................... 27

Figure 4.2 Thermal sensor location.......................... 27

Figure 4.3 Thermal sensor module .......................... 28

Table 4.12 CN1 & CN2, Temperature sensor connec-

tor ......................................................... 28

Table 4.13 SW1, Thermal sensor I.D. number setting .

Appendix A Exploded Diagram & .....................................30

A.1 Exploded Diagram and Parts List.................................... 30

Figure A.1 Exploded diagram................................... 30

Table A.1 Parts List ................................................. 30

Appendix B Backplane and Motherboard Options..........34

B.1 Backplane Options .......................................................... 34

Table B.1 PICMG 1.3 Backplane Options .............. 34

Table B.2 PICMG 1.0 Backplane options............... 34