User`s manual

AIMB-744 User’s Manual 32
2.22 Connecting to SNMP-1000 remote manager
Use the 6-pin to 8-pin cable to connect the motherboard to SNMP-1000.
This cable comes with the SNMP-1000.
2.23 Auxiliary 4-pin power connector (ATX1)
To ensure there is adequate power for a Pentium 4 motherboard, one aux-
iliary 4 pin power connector is available on the AIMB-744. ATX1 must
be used to provide sufficient 12V to ensure the stable operation of the
system.
(red)
PIN 1
(red)
PIN 1