User`s manual

25 Chapter 2
2.11 Front Panel Connectors (CN16, 17, 18, 19, 21&29)
There are several external switches to monitor and control the AIMB-744
2.11.1 Power LED and Keyboard Lock (CN16)
CN16 is a 5-pin connector for the power on LED. Refer to Appendix B
for detailed information on the pin assignments. If a PS/2 or ATX power
supply is used, the system's power LED status will be as indicated below:
Table 2.1: PS/2 or ATX power supply LED status
2.11.2 External speaker (CN17)
CN17 is a 4-pin connector for an external speaker. If there is no external
speaker, the AIMB-744 provides an onboard buzzer as an alternative. To
enable the buzzer, set pins 3-4 as closed.
Power mode LED (PS/2 power) LED (ATX power)
System On On On
System Suspend Fast flashes Fast flashes
System Off Off Slow flashes
CN16,17,18,19,21,29