User`s manual

15
1.8.6 Real/Front panel USB port selection (S1 & S2)
The AIMB-744 contains two USB DIP switches that allow users to select
which USB port they need (USB port 2, 3 or USB port 4,5). The default
setting is front panel USB 2.0 (Enabling ports 4, 5 on CN6 and disabling
ports 2,3 on CN32 ), and the optional setting is rear USB 2.0 (Enabling
ports 2, 3 on CN32, disabling ports 4,5 on CN6).
Table 1.7: USB port 2, 3/ port 4, 5 selection (S1&S2)
1.9 System Memory
The AIMB-744 has four sockets for 184-pin dual inline memory modules
(DIMMs) in two separated memory channels. It can operate with single
channel or dual channel modules. We recommend to use dual channel
mode to provide optimized performance.
All these sockets use 2.5 V unbuffered double data rate synchronous
DRAMs (DDR SDRAM). They are available in capacities of 128, 256,
512 and 1024 MB. The sockets can be filled in any combination with
DIMMs of any size, giving a total memory size between 128 MB and 4
GB.
Switches Setting Result
S1 S2 Front panel USB 2.0
(Enable ports 4, 5 on
CN6, disable ports 2, 3
on CN32)
Default setting
S1 S2 Rear USB 2.0 (Enable
ports 2,3 on CN32,
disable ports 4,5 on
CN6). Remove the
sticker on CN32.