User manual

ACP-2320MB User Manual 18
3.3.2 Replacing the fan behind the SAS / SATA HDD backplane
1. Remove the top cover.
2. Unplug the fan power connector.
3. Push the hook on the left side of the fan to take out the fan (see Figure 3.7).
4. Replace the broken fan with a new one.
5. Stick the fan to the hook on the right side of the bracket, then directly push the
fan into the bracket.
6. Plug in the fan power connector.
7. Replace the top cover and fasten it.
Figure 3.6 Replacing the fan behind the SAS / SATA HDD backplane
Figure 3.7 Remove the fan from the plastic bracket