User`s manual

63 Chapter 6
6.3 Installation
The AIMB-740/741's onboard Ethernet interface supports all major net-
work operating systems. However, the installation procedure varies with
different operating systems. In the following sections, refer to the one that
provides driver setup procedure for the operating system you are using.
6.4 Win XP Driver Setup (Intel 82541/82562/82551)
1. Insert the driver CD into your system's CD-ROM drive. In a few
seconds, the software installation main menu appears, as shown in
the following figure. Under the "LAN Drivers" heading, click on
the "Manual" to open file manager, then click "SETUP.EXE" to
run the installation procedure.
2. Select "I accept the terms in the license agreement" and click
"Next" to continue.
3. Select "Typical" and click "Next" to continue.
Note: Before installing the LAN drivers, make sure the
CSI utility has been installed in your system.
See Chapter 4 for information on installing the
CSI utility.