User manual
Table Of Contents
- Chapter 1 General Information
- Chapter 2 System Setup
- 2.1 System installation
- 2.2 Installing motherboard
- 2.3 Installing passive backplane & CPU card
- 2.4 Installing plug-in cards
- 2.5 Installing disk drives
- 3.1 The Front Section of ACP-4320
- 3.2 Replacing the fans
- 3.3 Cleaning the filters
- 3.4 Replacing the power supply
- 4.1 Alarm board layout
- 4.2 Alarm board specifications
- 4.3 Switch settings
- 4.4 Thermal sensor
- Appendix A Exploded Diagram
- Appendix B Safety Instructions
- B.1 English
- B.2 German - Wichtige Sicherheishinweise
v
Initial Inspection
Before you installing your backplane, please make sure that the following
materials have been shipped:
• ACP-4320 Chassis
• User Manual
• Warranty Card
• Accessory box, including a pack of screws (for fixing backplane/moth-
erboard and disk drives), a pair of keys, one EMI spring plate (bare
chassis only), and some rubber cushions.
If any of these items are missing or damaged, contact your distributor or
sales representative immediately. We have carefully inspected the ACP-
4320 mechanically and electrically before shipment. It should be free of
marks and scratches and in perfect working order upon receipt. As you
unpack the ACP-4320, check it for signs of shipping damage. (For exam-
ple, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet
the specifications, notify our service department or your local sales repre-
sentative immediately. Also notify the carrier. Retain the shipping carton
and packing material for inspection by the carrier. After inspection, we
will make arrangements to repair or replace the unit.