User`s manual

71 Chapter 6
6.3 Installation
The AIMB-740-6CB1's onboard Ethernet interface supports all major
network operating systems. However, the installation procedure varies
with different operating systems. In the following sections, refer to the
one that provides driver setup procedure for the operating system you are
using.
6.4 Win XP Driver Setup (Intel 82562)
1. Insert the driver CD into your system's CD-ROM drive. In a few
seconds, the software installation main menu appears, as shown in
the following figure. Under the "LAN Drivers" heading, click on
the "Manual" to open file manager, then click "SETUP.EXE" to
run the installation procedure.
2. Select "I accept the terms in the license agreement" and click
"Next" to continue.
Note: Before installing the LAN drivers, make sure the
CSI utility has been installed in your system.
See Chapter 4 for information on installing the
CSI utility.