User`s manual

AIMB-740-B/741-B User’s Manual 70
Chapter 6 LAN Configuration
6.1 Introduction
The AIMB-740-6CB1 features the 32-bit 10/100/1000 Mbps Ethernet
network interface. This interface supports bus mastering architecture and
auto-negotiation features. Therefore standard twisted-pair cabling, with
an RJ-45 connector for 10 Mbps and 100 Mbps connections, can be used.
Extensive driver support for commonly-used network systems is also pro-
vided.
6.2 Features
• Intel 82562 10/100Base-T Ethernet LAN controller.
• Supports Wake-on-LAN remote control function.
• PCI Bus Master complies with PCI Rev. 2.2.
• MAC & PHY (10/100 Mbps) interfaces.
• Complies with 100Base-TX, and 10Base-T applications.
• Fully supports 100Base-TX, and 10Base-T operation.
• Single RJ-45 connector gives auto-detection of 10 Mbps and 100 Mbps
network data transfer rates and connected cable types.
• Plug and Play.
• Enhancements on ACPI & APM.
• Complies with PCI Bus Power Management Interface Rev. 1.1.
• ACPI Rev. 2.0, and Device Class Power Management Rev. 1.0.