User`s manual

47 Chapter 3
3.7 Power Management Setup
The power management setup controls the single board computer's
“green” features to save power. The following screen shows the manufac-
turer’s defaults:
3.7.1 ACPI function
The choice: "Enabled", "Disabled".
3.7.2 ACPI Suspend Type
The Choice : "S1(POS)", and "S3(STR)". While selecting "S3(STR)", the
"Run VGABIOS if S3 Resume" and "Resume on USB from S3" will be
active for selection.
3.7.3 Power Management
This category allows you to select the type (or degree) of power saving
and is directly related to the following modes:
1. HDD Power Down
2. Suspend Mode
There are three selections for Power Management, and they have fixed
mode settings.
Figure 3.6: Power management setup screen (1)
Min Saving Minimum power management., Suspend Mode = 1 hr.,
and HDD Power Down = 15 min.
Max Saving Maximum power management., Suspend Mode = 1 min.,
and HDD Power Down = 1 min.