User`s manual

AIMB-740-B/741-B User’s Manual 20
2.4 Parallel Port (CN4)
The parallel port is normally used to connect the motherboard to a printer.
The AIMB-740-6CB1 includes an onboard parallel port, accessed
through a 26-pin flat-cable connector, CN4.
2.5 USB Ports (CN6)
The AIMB-740-6CB1's provides up to six ports of USB (Universal
Serial Bus) interface, which gives complete Plug & Play and hot swap-
ping for up to 127 external devices.The USB interface complies with
USB Specification Rev. 2.0 support transmission rate up to 480 Mbps and
is fuse-protected. The USB interface can be disabled in the system BIOS
setup.