User`s manual

AIMB-740-B/741-B User’s Manual 4
• EIDE hard disk drive interface: Supports up to four IDE hard disk
drives other enhanced IDE devices. Supports PIO mode 4 (16.67 MB/s
data transfer rate) and Ultra ATA 100/66/33 (100/66/33 MB/s data
transfer rate).
• Floppy disk drive interface: Supports up to two floppy disk drives,
5¼" (360 KB and 1.2 MB) and/or 3½" (720 KB, 1.44 MB). BIOS
enabled/disabled
1.3.2 Memory
• RAM: Up to 2GB in two 184-pin DIMM sockets. Supports DDR200/
266 SDRAM (AIMB-740-6CB1 supports DDR333).
• ECC: AIMB-740-6CB1: not supported, AIMB-740-6CB1: supported
1.3.3 Input/Output
• PCI Bus: 5 PCI slots, 32-bit, 33MHz. PCI 2.2 compliant
• GPIO: 2 on-board 8-bit GPIO headers.
• Enhanced parallel port: Configurable to LPT1, LPT2, LPT3, or dis-
abled. Standard DB-25 female connector provided. Supports EPP/SPP/
ECP
• Serial ports: 6 serial ports, 2 of RS-232/422/485; 4 of RS 232.
• Keyboard and PS/2 mouse connector: Two 6-pin mini-DIN connec-
tor are located on the mounting bracket for easy connection to a key-
board and PS/2 mouse.
• USB port: Supports up to six USB 2.0 and transmission rate up to
480Mbps. (Six USB ports are available in AIMB-740-6CB1)
1.3.4 VGA interface
• Interface:
• Chipset integrated VGA controller, shared system memory 8 to 64 MB;
AIMB-740-6CB1 do not support AGP
1.3.5 Ethernet LAN
• Supports single 10/100Base-T
• Chipset: Intel® 82562 chipset for 10/100Base-T LAN