User manual

AIMB-641 User Manual 94
Appendix D AT/ATX Power setting
D.1 Introduction
AIMB-641 supports ATX power mode to boot up the system. ATX
should connect standby power and power supply on# signal to turn on
main power supply.
The power connector table & Power supply diagram tables are as below:
Table D.1: Power Connector
Power Connector (CN15) Power Type: ATX
Pin 1: GND GND
Pin 2: GND GND
Pin 3: VCC +5V
Pin 4: GND GND
Pin 5: VCC +5V
Pin 6:VCCSB Standby +5V
Pin 7: GND GND
Pin 8: PWR_PSON# PWR_PSON#
Pin 9: VCC +5V
Pin 10: GND GND
Pin 11: VCC +5V
Pin 12: +12V +12V