User manual

AIMB-582 User Manual 4
 Power supply voltage: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb
 Power consumption:
Intel LGA1155 Core i7 3770 3.4GHz, 8MB L3 Cache, 4pcs 8GB DDR3
1600MHz memory
+5 V 3.3 V 12 V 5 Vsb -12 V
2.69 A 0.93 A 5.3 A 0.0 A 0.52 A
Measure the maximum current value which system under maximum load (CPU:
Top speed, RAM & Graphic: Full loading)
 Board size: 240 mm x 240 mm (9.6" x 9.6")
 Board weight: 0.365 kg
1.4 Jumpers and Connectors
Connectors on the AIMB-582 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label Function
JFP1 Power switch/HDD LED/SMBus/Speaker
JFP2 Power LED and Keyboard lock
CMOS1 CMOS clear (Default 1-2)
PSON1 AT(1-2) / ATX(2-3) (Default 2-3)
JWDT1+JOBS1 Watchdog Reset and OBS Alarm
JCASE1 Case Open pin header
JLVDS1
Voltage 3.3 V/5 V/12 V selector for LVDS1 connector
(Default 1-2, 3.3 V)
JLVDS_CLT1
Brightness control selector for Analog or Digital
(Default 1-2, Analog)
JEME1 Intel AMT Disable Jumper
JMECLR1 Clear AMT setting
JUSBPWR1 USB port 0-1 power source switch between +5 Vsb and +5 V
JUSBPWR2 USB port 2-3 power source switch between +5 Vsb and +5 V
JUSBPWR3 USB port 4/5/8/9 power source switch between +5 Vsb and +5 V
JUSBPWR4
USB port 10/11/12/13 power source switch between +5 Vsb and +5
V
Table 1.2: Connectors
Label Function
LPT1 Parallel port, supports SPP/EPP/ECP mode
LVDS1 LVDS1 connector
INV1 LVDS1 inverter connector
COM3456 Serials port connector (RS-232)
USB45 USB port 4, 5 (on board)
USB89 USB port 8, 9 (on board)