User manual

AIMB-567 User Manual 36
is either a ZIP, LS-120, or MO drive. Configuration options are “Not Installed”,
“Auto”, “CDROM” and “ARMD”. This item does not appear when you select
SATA 1/2/3/4 devices.
 SATA1/SATA2/SATA3/SATA4
While entering setup, the BIOS automatically detects the presence of SATA
devices. This displays the status of SATA device auto-detection.
 LBA/Large Mode
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if
the device supports this mode, and if the device was not previously formatted
with LBA mode disabled. Configuration options are “Disabled” and “Auto”.
 Block (Multi-Sector Transfer)
Enables or disables data multi-sector transfers. When set to [Auto], data is
transfered from multiple sectors at a time to and from devices if the device sup-
ports a multi-sector transfer feature. When set to [Disabled], the data transfer to
and from the device occurs one sector at a time. Configuration options are “Dis-
abled” and “Auto”.
 PIO Mode
Select the PIO mode. Configuration options are “Auto”, “0“, “1“, “2“, “3“ and “4“.
 DMA Mode
Select the DMA mode. Configuration option is “Auto”.
 S.M.A.R.T.
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options are “Auto”, “Disabled” and “Enabled”.
 32Bit Data Transfer
Enables or disables 32-bit data transfer. Configuration options are “Disabled”
and “Enabled”.
3.2.5 Super IO Configuration
This item enables users to set the Super IO device status, including enabling of
COMs.
 Watchdog Timer
 Watchdog Mode