User manual

AIMB-567 User Manual 24
2.12 ATX Power Connector (ATX12V1, EATXPWR1)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation
and push down firmly until the connectors completely fit.
Note! 1. Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB).
The minimum recommended wattage is 230W, or 300W for a fully
configured system. The system can become unstable and might
experience difficulty powering up if the power supply is inadequate.
2. You must install a PSU with a higher power rating if you intend to
install additional devices.
ATX12V
EATXPWR1