User manual

73 Chapter 2 Product Information
2.12 Password Setting
Follow these steps to change the password.
1. Choose the “Set Password” option from the “Initial Setup Screen”
menu and press <Enter>. The screen displays the following mes-
sage:
2. Press <Enter>.
3. If the CMOS is good and this option has been used to change the
default password, the user is asked for the password stored in the
CMOS. The screen displays the following message:
4. Type the current password and press <Enter>.
5. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first select
either “Setup” or “System” from the “Advanced BIOS Features” menu.
Please Enter Your Password
Please Confirm Your Password