User manual

AIMB-564 User Manual 68
2.8 PnP/PCI Configuration
Figure 2.11: PnP/PCI configurations screen
2.8.1 Init Display First
Choose the first display interface to initiate while booting. The choice is
“PCI Slot” or “Onboard”.
2.8.2 Reset Configuration Data
The default is “Disabled”. Select “Enabled” to reset Extended System
Configuration Data (ESCD) if you have installed a new add-on card, and
system configuration is in such a state that the OS cannot boot.
2.8.3 Resources Controlled By
The commands here are “Auto(ESCD)” or “Manual”. Choosing “Man-
ual” requires you to choose resources from the following sub-menu.
“Auto(ESCD)” automatically configures all of the boot and Plug and Play
devices, but you must be using Windows 95 or above.
2.8.4 PCI / VGA Palette Snoop
This is set to “Disabled” by default.
2.8.5 Maximum Payload Size
This allows you to set the maximum TLP payload size for PCIe devices.
The options are [128 bytes].