User manual

AIMB-564 User Manual 56
2.4.16 APIC Mode
Allows you to enable Advanced Configuration and power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller
(APIC).
2.4.17 MPS Version Control For OS
(Supports Multi Processor Specification revision 1.4)
Note:
Some old MPS OS support 1.1 version only.
81.4 Support MPS Version 1.4. (Default Value)
81.1 Support MPS Version 1.1.
2.4.18 OS Select For DRAM > 64MB
Select an operating system that is running with greater than 64MB of
RAM on the system. The choices: Non-OS2, OS2.
Note:
To disable security, select PASSWORD SETTING in the
main menu. Then, you will be asked to enter a password.
Simply press <Enter> to disable security. When security is
disabled, the system will boot and you can enter Setup
freely.