User manual

AIMB-564 User Manual 52
2.3.2 Time
The time format is <hours> <minutes> <seconds>, based on the 24-hour
clock.
2.3.3 IDE Channel 0/1 Master/Slave
• IDE HDD Auto-Detection: Press “Enter” to select this option for
automatic device detection.
• IDE Device Setup:
Auto: Automatically detects IDE devices during POST
None: Select this when no IDE device is used. The system will skip the
auto-detection step to make system start up faster.
Manual: User can manually input the correct settings.
• Access Mode: The options are CHS/LBA/Large/Auto
• Capacity: Capacity of currently installed hard disk.
• Cylinder: Number of cylinders
• Head: Number of heads
• Precomp: Write precomp
• Landing Zone: Landing zone
• Sector: Number of sectors
2.3.4 Drive A / Drive B
This category identifies the types of floppy disk drives installed in the
system. The options are: None/360K, 5.25"/1.2M, 5.25"/720K, 3.5"/
1.44M, 3.5"/2.88M, 3.5".
2.3.5 Video
This category detects the type of adapter used for the primary system
monitor that must match your video display card and monitor.
• EGA / VGA: Enhanced Graphics Adapter/Video Graphics Array. For
EGA, VGA, SVGA, or PGA monitor adapters.
• CGA 40: Color Graphics Adapter, power up in 40 column mode.
• CGA 80: Color Graphics Adapter, power up in 80 column mode.
• MONO: Monochrome adapter, includes high resolution monochrome
adapters