User manual

AIMB-564 User Manual 40
8. USB connectors (10-1 pin USB56, USB 78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports a connection speed of up to 480 Mbps.
Figure 1.16: USB 2.0 connectors
Caution! Never connect a 1394 cable to the USB connectors.
Doing so will damage the motherboard!
Note:
The USB module is purchased separately.
R
USB56
USB+5V USB_P6- USB_P6+ GND NC
USB+5V
USB_P5-
USB_P5+
GND
USB78
USB+5V USB_P8- USB_P8+ GND NC
USB+5V
USB_P7-
USB_P7+
GND
USB910
USB+5V USB_P10- USB_P10+ GND NC
USB+5V
USB_P9-
USB_P9+
GND