User manual

AIMB-564 User Manual 22

To install a DIMM:

1.6.4 Removing a DIMM

To remove a DIMM:

1. Unlock a DIMM socket by

pressing the retaining clips

outward.

2. Align a DIMM on the

socket such that the notch

on the DIMM matches the

break on the socket.

3. Firmly insert the DIMM

into the socket until the

retaining clips snap back in

place and the DIMM is

properly seated.

Note:

A DDR2 DIMM is keyed with a notch so that it fits in only one

direction. Do not force a DIMM into a socket to avoid damag-

ing the DIMM.

The DDR2 DIMM sockets do not support DDR DIMMs. Do

not install DDR DIMMs to the DDR2 DIMM sockets.

1. Simultaneously press the

retaining clips outward to

unlock the DIMM.

Note: Support the DIMM

lightly with your fin-

gers when pressing

the retaining clips. The

DIMM might get dam-

aged if it flips out with

extra force.

2. Remove the DIMM from

the socket.

DDR2 DIMM notch