User manual

9 IPC-603MB User Manual

Chapter 2 System Setup

Figure 2.4 Place the drive bay bracket kit into the chassis

1. Open the top cover of the chassis.

2. Remove the four screws that mount the drive bay bracket kit in the chassis.

3. Remove the front cover of the slim-type ODD from the bracket kit.

4. Refer to Figure 2.4 and mount a slim-type ODD and a 3.5" HDD with screws.

5. Return the drive bay bracket kit into the chassis and fix it with screws.

6. Connect a 40-pin flat cable from the motherboard to the slim-type ODD, and

another 40-pin flat cable to an ATA (IDE) HDD or a SATA cable to a SATA HDD.

Insert the proper power connectors into each drive.

2.5 Attaching the Ears & Handles

The IPC-603MB provides a pair of ears and handles in the accessory pack. To install

the ears and handles onto the chassis, refer to Figure 2.5.

Figure 2.5 Attaching the ears and handles

HDD

Slim

CD-ROM

handle

rackmount bracket