User manual

11 ACP-2010MB User Manual
Chapter 2 System Setup
2.4 Installing Disk Drives
The ACP-2010MB supports one 5.25" optical disk drive and three 3.5" disk drives
(one FDD and two internal HDDs).
To install the 3.5” internal HDD, 5.25" optical disk drive and the 3.5" FDD, please fol-
low these steps for installation:
1. To install the 3.5" internal HDD, simply release the four screws on top of the disk
drive bracket.
2. Insert the disk drive into the proper location in the bracket and secure them with
the screws provided. (see Figure 2.7)
3. Return the bracket with the disk drive in the original position and fasten it with
the screws.
Figure 2.7 Installing the internal HDD