User manual

AIMB-212 User Manual 12
1.9 System Memory
The AIMB-212 has one socket for a 200-pin SODIMMx1.
This socket uses a 1.8 V unbuffered double data rate synchronous DRAM (DDR
SDRAM). DRAM is available in capacities of 512 MB, 1 GB and 2 GB. The socket
can be filled in any combination with DIMMs of any size, giving a total memory size
between 512 MB and 2 GB. AIMB-212 does NOT support ECC (error checking and
correction).
1.10 Memory Installation Procedures
To install SODIMMs, first make sure the two handles of the SODIMM socket are in
the “open” position, i.e., the handles lean outward. Slowly slide the SODIMM module
along the plastic guides on both ends of the socket. Then press the SODIMM module
well down into the socket, until you hear a click when the two handles have automat-
ically locked the memory module into the correct position of the SODIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism.