User manual

35 Chapter 2
2.26 Connecting to SNMP-1000 Remote Manager
Use the 6-pin to 8-pin cable to connect the motherboard to SNMP-1000.
This cable comes with the SNMP-1000.
2.27 Auxiliary 4-pin power connector (ATX1)
To ensure the enough power is supplied to the motherboard, one auxiliary
4 pin power connector is available on the AIMB-554. ATX1 must be used
to provide sufficient 12 V power to ensure the stable operation of the sys-
tem.
(red)
PIN 1
(red)
PIN 1