User manual

AIMB-554 User Manual 4
devices with software Serial ATA RAID 0,1. One on-board IDE con-
nector supporting up to two
enhanced IDE devices. Supports PIO mode
4 (16.67MB/s data transfer rate) and ATA 33/66/100 (33/66/100MB/s
data transfer rate.) BIOS enabled/disabled.
• Floppy disk drive interface: Supports one floppy disk drive, 5¼" (360
KB and 1.2 MB) or 3½" (720 KB, 1.44 MB). BIOS enable/disable
1.3.2 Memory
• RAM: Up to 2 GB in four 240-pin DIMM sockets. Supports dual-chan-
nel DDRII 400/533/667 SDRAM.
1.3.3 Input/Output
• PCI Express slots: 1 PCI-E x 16 expansion slot and 1 PCI-E x 4
expansion slot.
• PCI Bus: 2 PCI slots, 32-bit, 33 MHz PCI 2.2 compliant
• Enhanced parallel port: Configured to LPT1, LPT2, LPT3, or dis-
abled. Standard DB-25 female connector provided. Supports EPP/SPP/
ECP
• Serial ports: Two serial ports, one DB-9 (RS 232)connector and one
on-board pin header (RS 232/422/485). Ports can be individually con-
figured to COM1, COM2, or disabled
• Keyboard and PS/2 mouse connector:
Two 6-pin mini-DIN connec-
tors are located on the mounting bracket for easy connection to a PS/2
keyboard and mouse.
• USB port: Supports up to eight USB 2.0 ports with transmission rate
up to 480Mbps.
1.3.4 Graphics
• Controller: Chipset integrated VGA controller
• Display memory: Dynamically shared system memory up to 224 MB.
• CRT: Up to 2048x1536 resolution, 400MHz RAMDAC
• LVDS interface: Support up to UXGA(1600X1200)
• TV-Out: NTSC/PAL.
• PCI-Express X16 slot
The AIMB-554 can provide a LVDS display, and you can use the relative
accessories to install LVDS display as below:
• 15” 1024X768 Panel P/N: 1330000018
• Inverter P/N:1250000007
• LCD cable P/N: P-CBIV105204202
• Power cable P/N: P-CBLC320140501