User`s manual

1-24 Chapter 1: Product introduction
3. K eyboard p ower (3-p in K BPWR)
This jumper allows you to enable or disable the keyboard wake-up feature.
Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press
a key on the keyboard (the default is the Space Bar). This feature requires
an ATX power supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
Keyboard power setting
(Default)
+5V +5VSB
KBPWR
2 31 2