User manual

IPC-610 User Manual 22
3.3.3 Replacing the Cooling Fan for IPC-610-L/IPC-611
There is a cooling fan behind the front panel. Please proceed according to the
instructions below.
1. Remove the front left cover.
2. Unplug the fan power connector.
3. Loosen the screws on the fan unit and then gently pull it out.
4. Loosen four screws on the fan bracket and the four screws on the fan guard and
replace it with a new one. (see Figure 3.6)
5. Fix the new cooling fan on the fan guard and the bracket by screwing in the
eight screws.
6. Replace the fan unit into the chassis and reconnect the fan power connector.
7. Replace the front left cover and fasten it.
Figure 3.6 Replacing the cooling fan for IPC-610-L/IPC-611