User manual

IPC-610 User Manual 18
3.1 The Front Panel
The front panel features a lockable door, LED indicators, PS/2 and dual USB ports.
The user can close the door with or without a key. There is a momentary power
switch, a system reset button (and an alarm reset button for ACP-4000; a keyboard
lock button for IPC-610-F & IPC-610-E; an AT keyboard connector for IPC-610-E).
Their individual functions are described as below.
3.1.1 Switch, Button and I/O Interfaces
Momentary Power switch: Press this switch to turn the system power on or off.
Please use system shutdown or press this switch for few seconds to turn off the sys-
tem ATX power.
System Reset button: Press this button to reboot the system.
Alarm Reset button (ACP-4000): Whenever a fault occurs in the system (e.g., fan
failure or the chassis is overheated), the audible alarm will be activated. Pressing this
button will stop the alarm from beeping.
Keyboard Lock button (IPC-610-F/IPC-610-E): Press this button to lock/unlock the
keyboard operation.
PS/2 port: For connecting keyboard or mouse depending on the motherboard.
Dual USB ports: For connecting a wide range of USB devices for data transfer,
backup or input.
AT keyboard connector (IPC-610-E): For connecting AT keyboard.
Figure 3.1 Front panel of IPC-610-F
3.1.2 LED Indicators for System Status
The LEDs are placed on the front panel to indicate system health and activity. Please
refer to Table 3.1 for the LED definition summary. Different chassis have different
LED layout and functions.
Table 3.1: LED indicator functions
LED Description Green Red
Power System Power Normal Abnormal
Hard Disk Hard Disk drive activity Data access No light
Temperature Temperature in the chassis Normal Abnormal
Fan Cooling fan status Normal Abnormal