User manual

IPC-610 User Manual 14
2.4 Hold-down Clamp
The hold-down clamp protects all the cards from vibration and shock. After installing
all the cards, please refer to the following steps to install the rubber cushions and the
hold-down clamp.
1. There are two rows of notches on both sides of the hold-down clamp for insert-
ing into rubber cushions provided in the accessory. One side is for PCI cards,
while the other side is for ISA cards. Depending on the card height, the cushions
can be inserted upward or downward. After the rubber cushions have been
inserted into the notches, they will stabilize the add-on cards to protect them
from shock and vibration. (see Figure 2.6)
2. Secure the hold-down clamp into its original position.
Figure 2.6 Installing rubber cushions and hold-down clamp