User manual

IPC-610 User Manual 10
The following procedures instruct users to install a backplane/motherboard, add-on
cards, and disk drives into the chassis. Please also refer to Appendix A, Exploded
Diagram, for the detailed parts of the chassis. For some installation steps which is
similar to other chassis model, we just use IPC-610-F to explain the procedures.
2.1 Removing the Top Cover
Remove the chassis top cover by releasing the screws on sides of the chassis.
Figure 2.1 Removing the top cover
Note! Use caution when installing or operating the components with the chas-
sis open. Be sure to turn off the power, unplug the power cord and
ground yourself by touching the metal chassis before you handle any
components inside the machine.