User manual

AIMB-270 User Manual 50
3.5 Boot Setting
! Quiet Boot
If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
! Fast Boot
This item allows BIOS to skip certain tests while booting. This will decrease the
time needed to boot the system.
! Setup Prompt Timeout
Number of seconds to wait for setup activation key. (65535 means indefinite
waiting)
! Bootup Numlock State
When "ON", the keyboard num lock state will stay "ON" after booting.
When "OFF", the keyboard num lock state will stay "OFF" after booting.
! Option ROM Message
Set display mode for Option ROM
! GateA20 Active
UPON REQUEST: GA20 can be disabled using BIOS services.
Always: do not allow disabled GA20
! Interrupt19 Capture:
Enable/disable option for ROM to trap int 19.
! Boot Option Priority
Boot Option #1
Boot Option #2
Show the boot device choices.
! Hard Drive BBS Priorities:
Select the main hard disk device type to be a boot hard drive.