User manual

23 AIMB-270 User Manual

Chapter 2 Connecting Peripherals

2.14 ATX Power Connector (EATXPWR1,

EATXPWR2)

This connector is for an ATX Micro-Fit power supply. The plugs from the power sup-

ply are designed to fit these connectors in only one direction. Determine the proper

orientation and push down firmly until the connectors mate completely.

Note! 1. Please do connect the EATXPWR2 connector with the PSU ATX

12V 4-pin connector.

2. For a fully configured system, we recommend that you use a power

supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or

later version) and provides a minimum power of 180 W.