User`s manual

3-11
BIOS Setup
LVDS Panel Type
ThissettingspeciestheresolutionoftheLVDSpanel.
LVDS Backlight Control
This setting controls the brightness level of the LVDS panel backlight.
Integrated Peripherals
EIDE Primary Master/Slave PIO
TheEIDEPIO(ProgrammedInput/Output)eldsletyousetaPIOmodeforthe
EIDE devices that the onboard EIDE interface supports. Modes 0 through 4 pro-
vide successively increased performance. In [Auto] mode, the system automati-
cally determines the best mode for each device.
EIDE Primary Master/Slave UDMA
Ultra DMA 33/66/100/133 implementation is possible only if your EIDE hard drive
supports it and the operating environment includes a DMA driver (Windows ME,
XP or a third-party EIDE bus master driver). If your hard drive and your system
software both support Ultra DMA/33, Ultra DMA/66, Ultra DMA/100 and Ultra
DMA/133, select [Auto] to enable BIOS support.
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
Thissettingspeciesthefunctionoftheon-chipSATAcontroller.
[Disabled] Disable SATA controller
[Auto] Automatically determined by BIOS
[Enhanced Mode] Enable both SATA and PATA, max. 6 EIDE
drives supported