User`s manual

2-6
AIMB-253 Mainboard
Volt
Notch
Important
You can barely see the golden nger if the memory module is properly inserted in
the DIMM slot.
The mainboard provides one 240-pin non-ECC DDRII 533/667 DIMM slot and sup-
ports up to 2GB system memory.
64x2=128 pin 56x2=112 pin
DDRII
240-pin, 1.8V
Single-Channel: All DIMMs in GREEN
1.Thememorymodulehas onlyonenotchonthecenterandwillonlytintheright
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
goldenngeronthememorymoduleisdeeplyinsertedintheDIMMslot.
3. The plastic clip at each side of the DIMM slot will automatically close.
Memory
Installing DDRII Modules