User manual

AIMB-273 User Manual 24
2.14 ATX Power Connector (EATXPWR1, ATX12V1)
This connector is for an ATX Micro-Fit power supply. The plugs from the power sup-
ply are designed to fit these connectors in only one direction. Determine the proper
orientation and push down firmly until the connectors mate completely.
Note! 1. Please do connect the ATX12V1 connector with the PSU ATX 12V
4-pin connector.
2. For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 180 W.