User Manual AIMB-273 Intel® Core™ i7/i5/i3/Celeron uFC-PGA988 Mini-ITX with 2 DP/ HDMI/LVDS/CRT, 2 COM, Dual LAN, PCIe x16
Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
A Message to the Customer Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern.
Declaration of Conformity FCC Class B This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Memory Compatibility Test Item Description Brand Size Speed Type Result Remark ECC Vendor PN Memory Transcend 1GB DDR3 SODIMM N 1066 DDR3 TS128MS K64V1U SEC K4B1G0846GBCH9 PASS Transcend 2GB DDR3 SODIMM N 1066 DDR3 TS128MS K64V1U SEC HCH9 K4B1G0846D (128x8) PASS Transcend 4GB DDR3 SODIMM N 1066 DDR3 HYNIX TS7KSN28 H5TQ2G83BFR 420-1Y (256x8) PASS Apacer 4GB DDR3 SODIMM N 1066 DDR3 HYNIX 78.B2GC8.
Ordering Information Part Number Chipset PCH AIMB-273G2-00A1E QM77 VGA HDMI LVDS DP QM77 Yes Yes Yes SATA USB COM GbE LAN Yes 4 8 2 2 Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped: 1 x AIMB-273 Intel Core™ i7/i5/i3/Celeron uFC-PGA988 Mini-ITX motherboard 2 x SATA HDD cable 1 x CPU cooler 1 x Cable kit for 2 serial ports 1 x I/O port bracket 1 x Startup manual 1 x Driver CD 1 x Warranty card If any of these items are missing or damaged, contact your distributor or sales representative immediately.
AIMB-273 User Manual viii
Contents Chapter 1 General Information ............................1 1.1 1.2 1.3 1.9 1.10 1.11 1.12 Introduction ............................................................................................... 2 Features .................................................................................................... 2 Specifications ............................................................................................ 2 1.3.1 System .............................................................
2.13 2.14 2.15 2.16 2.17 2.18 LOCK)......................................................................................... 18 Table 2.2: ATX power supply LED status (No support for AT power) ............................................................................. 18 Line In, Line Out, Mic In Connector (AUDIO1)........................................ 18 Digital Audio Connector (SPDIF_OUT1)................................................. 19 Serial ATA Interface (SATA1 ~ SATA4)........................
A.1 A.2 A.3 A.4 A.5 A.6 A.7 A.8 A.9 A.10 A.11 A.12 A.13 A.14 A.15 A.16 A.17 A.18 A.19 A.20 A.21 A.22 USB Header (USB56, USB78)................................................................ 80 Table A.1: USB Header (USB56)............................................... 80 VGA Connector (VGA1) .......................................................................... 80 Table A.2: VGA Connector (VGA1) ........................................... 80 HDMI1: HDMI Connector ...................................
AIMB-273 User Manual xii
Chapter 1 1 General Information
1.1 Introduction AIMB-273 is designed with the Intel® QM77/HM67 for industrial applications that require both performance computing and enhanced power management capabilities. The motherboard supports Intel mobiel Core i7-3610QE 2.3GHz / Core i5-3610ME 2.7 GHz / Core i3-3120ME 2.4 GHz / Celeron B810 1.6 GHz processor up to 6 MB L3 cache and DDR3 SO-DIMM 1333/1600 up to 16GB. A rich I/O connectivity of 2 serial ports, 8 USB, dual GbE LAN and 4 SATA ports. 1.
Note! Triple independent display need to use DP+LVDS+HDMI, DP+DP+HDMI, DP+DP+LVDS, DP+CRT+HDMI. Note! Celeron B810 can't support triple display. 1.3.5 Ethernet LAN Supports dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 bus which provides 500 MB/s data transmission rate Controller: LAN1: Intel 82579LM; LAN2: Intel 82583V 1.3.6 Industrial features Watchdog timer: Can generate a system reset.
1.4 Jumpers and Connectors Connectors on the AIMB-273 motherboard link it to devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers. Chapter 2 gives instructions for connecting external devices to your motherboard. Table 1.
ATX12V_1 ATX 12V Auxiliary power connector (for CPU) ATXPWR1 ATX 20 Pin Main power connector (for System) CF1 CFast connector DP+HDMI1 Display port AND HDMI connector JHDMI1 Display Port to HDMI Convertor F/W Programming Port MINIPCIE1 Mini PCI Express x1 slot Figure 1.1 Jumper and Connector Location 5 AIMB-273 User Manual General Information 1.5 Board layout: Jumper and Connector Locations Chapter 1 Table 1.
1.6 AIMB-273 Board Diagram CRT CRT 2 Display Port 2 SATA 3 PORTS 600MB/s 4 USB PORTS USB 2.0 4 USB PORTS USB 3.0 LVDS 24/48 bit DDR3 1333/1600 Flex Display Interface PCIe x1 Intel 82579LM PCIe x1 Intel 82583V SATA 2.
Warning! Always completely disconnect the power cord from chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer.
1.8.2 CMOS Clear (CMOS1) The AIMB-273 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed. This procedure will reset the CMOS to its default setting. Table 1.3: CMOS1 Function Jumper Setting *Keep CMOS data 1-2 closed Clear CMOS data 2-3 closed * Default 1.8.
Table 1.5: JLVDS_CLT1: Backlight control selector for LVDS1 Closed Pins Result 1-2* Linear brightness control 2-3 PWM brightness control *Default 1 Chapter 1 1.8.4 JLVDS_CLT1: Backlight control selector for LVDS1 1 1.8.5 PSON1: ATX, AT Mode Selector Table 1.6: PSON1: ATX, AT Mode Selector Closed Pins Result 1-2 AT Mode 2-3* ATX Mode *Default 1 1 ATX Mode 2-3 closed AT Mode 1-2 closed 1.8.6 JWDT1+JOBS1: Watchdog Timer Output and OBS Alarm Option Table 1.
1.9 System Memory The AIMB-273 has two sockets for a 204-pin DDR3 SODIMM. This socket uses a 1.5 V unbuffered double data rate synchronous DRAM (DDR SDRAM). DRAM is available in capacities of 1 GB, 2 GB, 4 GB and 8 GB. The sockets can be filled in any combination with SODIMMs of any size, giving a total memory size between 1 GB, 2 GB, 4 GB and 8 GB. AIMB-273 does NOT support ECC (error checking and correction). 1.
Chapter 2 Connecting Peripherals 2
2.1 Introduction You can access most of the connectors from the top of the board as it is being installed in the chassis. If you have a number of cards installed or have a packed chassis, you may need to partially remove the card to make all the connections. 2.2 USB Ports (LAN1_USB12/LAN2_USB34/USB56/ USB78) The AIMB-273 provides up to eight USB ports. Four USB3.0 on the real side and four pin header on the board. The USB interface complies with USB Specification Rev. 2.0 and Rev. 3.
Chapter 2 2.3 VGA Connector(VGA1) 10 15 1 6 11 The AIMB-273 includes VGA interface that can drive conventional VGA displays. VGA1 is a standard 15-pin D-SUB connector commonly used for VGA.
2.4 Serial Ports (COM1~COM2) COM1/COM2 AIMB-273 supports two serial ports, and only support RS-232 function. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network. The IRQ and address ranges for both ports are fixed. However, if you want to disable the port or change these parameters later, you can do this in the system BIOS setup. Different devices implement the RS-232 standards in different ways.
2.6 CPU Fan Connector (CPU_FAN1) 3 2 1 15 AIMB-273 User Manual Connecting Peripherals Two 6-pin mini-DIN connectors (KBMS1) on the motherboard provide connection to a PS/2 keyboard and a PS/2 mouse, respectively. Chapter 2 2.
If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. 2.7 System FAN Connector (SYSFAN1/2) 3 2 1 If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less.
There are several headers for monitoring and controlling the AIMB-273. Connecting Peripherals 2.8.1 ATX soft power switch ((JFP1/PWR_SW)) If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to ((JFP1/ PWR_SW)), for convenient power on and off. 2.8.2 Reset (JFP1/RESET) Many computer cases offer the convenience of a reset button. Connect the wire for the reset button. 2.8.
2.8.5 Power LED and keyboard lock connector (JFP2/PWR_LED & KEY LOCK) (JFP2/PWR_LED & KEY LOCK) is a 5-pin connector for the power on LED and Key Lock function. Refer to Appendix B for detailed information on the pin assignments. The Power LED cable should be connected to pin 1-3. The key lock button cableshould be connected to pin 4-5. There are 3 modes for the power supply connection. The first is “ATX power mode”; the system turns on/off by a momentary power button.
AIMB-273 features a high performance Serial ATA interface (up to 300 MB/s) and Serial ATA III interface (up to 600 MB/s) which eases hard drive cabling with thin, space-saving cables. 19 AIMB-273 User Manual Connecting Peripherals 2.11 Serial ATA Interface (SATA1 ~ SATA4) Chapter 2 2.
2.12 PCI express x16 slot The AIMB-273 provides 1 x PCI express x16 slot. Note! Intel QM77 chipset supports PCIe x16 slot (Gen 2.0), but it still has some compatibility issues with certain interface cards; below is the compatibility list table.
Test Item Description Result Remark Brand Name Model Interface LAN Intel Intel 9400PT Server adapter PCI-E X1 PASS LAN Intel EXPI9301CTBLK PCI-E X1 PASS 3W-9650SE-2LP PCI-E X1 PASS LSI Raid SATA 2 port UPMOST 3GB/S 128MB Raid Card UPMOST MegaRAID SAS 8704EM2 PCI-E X8 PASS TV- Card COMPRO Vista E500F PCI-E X1 PASS USB FORCOM PE20U3 (USB 3.0) (chip: NEC APAN D720200F1 ) PCI-E X1 PASS Combo (1394B+USB2.
Table 2.
This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 (optional) audio standard. Connect this connector with the front panel audio I/O module cable. Chapter 2 2.13 Front Headphone Connector (FPAUD1) Connecting Peripherals Note! For motherboards with the optional HD Audio feature, we recommend that you connect a high-definition front panel audio module to this connector to take advantage of the motherboard’s high definition audio capability.
2.14 ATX Power Connector (EATXPWR1, ATX12V1) This connector is for an ATX Micro-Fit power supply. The plugs from the power supply are designed to fit these connectors in only one direction. Determine the proper orientation and push down firmly until the connectors mate completely. Note! 1. 2. AIMB-273 User Manual Please do connect the ATX12V1 connector with the PSU ATX 12V 4-pin connector.
The SPI flash card pin header may be used to flash BIOS if the AIMB-273 cannot power on. Chapter 2 2.
2.16 LCD Inverter Connector (INV1) Note! Signal Description Signal VR Signal Description Vadj=0.75 V (Recommended: 4.
Chapter 2 2.17 LVDS Connector (LVDS1) 27 AIMB-273 User Manual Connecting Peripherals 2.
AIMB-273 User Manual 28
Chapter 3 BIOS Operation 3
3.1 Introduction AMI BIOS has been integrated into many motherboards, and has been very popular for over a decade. People sometimes refer to the AMI BIOS setup menu as BIOS, BIOS setup or CMOS setup. With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning special features on or off. This chapter describes the basic navigation of the AIMB-273 setup screens. 3.
Press to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. Chapter 3 3.2.1 Main Menu BIOS Operation The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can. The right frame displays the key legend. Above the key legend is an area reserved for a text message.
3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-273 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.
Chapter 3 3.2.2.1 ACPI settings BIOS Operation Enable ACPI Auto Configuration Enable or disable BIOS ACPI Auto Configuration Enable Hibernation This item allows users to enable or disable hibernation ACPI Sleep state This item allows users to set the ACPI sleep state Lock Legacy Resources This item allows users to lock legacy devices’ resources.
3.2.2.2 Trusted Computing Security Device Suport Enable or disable BIOS support for security device.
Chapter 3 3.2.2.
3.2.2.4 CPU Configuration Hyper Threading This item allows users to enable or disable Intel® Hyper Threading technology. Active Processor Cores This item allows users to set how many processor cores should be active. Limit CPUID Maximum This item allows users to limit the maximum value of CPUID. Execute Disable Bit This item allows users to enable or disable the No-Execution page protection technology.
Chapter 3 3.2.2.5 SATA configuration BIOS Operation SATA Controller(s) This item allows users to enable or disable the SATA controller(s). SATA Mode Selection This item allows users to select mode of SATA controller(s).
3.2.2.6 INTEL Rapid Star Technology Intel® Rapid start technology This item allows users to enable or disable Intel rapid start technology.
Chapter 3 3.2.2.7 INTEL TXT(LT) Configuration BIOS Operation Secure Mode Extensions (SMX) This item allows users to enable or disable SMX. Intel TXT(LT) Support This item allows users to enable or disable Intel TXT.
3.2.2.8 PCH(FW) Configuration Me FW Image Re-Flash This item allows users to enable or disable Me FW image re-flash function.
Chapter 3 3.2.2.9 Intel® Anti-Theft Technology Configuration BIOS Operation Intel® Anti-theft Technology This item allows users to enable or disable Intel AT in bios for testing only. Enter Intel® AT Suspend Mode This item allows users to enable or disable enter Intel AT suspend mode function.
3.2.2.10 Intel AMT Configuration Intel AMT This item allows users to enable or disable Intel AMT BIOS extension. BIOS Hotkey Pressed This item allows users to enable or disable BIOS hotkey press. MEBx Selection Screen This item allows users to enable or disable MEBx selection screen. Hide Un-Configuration ME Confirmation This item allows users to hide un-configure ME without password confirmation prompt.
3.2.2.11 USB configuration Legacy USB support Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected. USB3.0 support This item allows user to enable or disable USB3.0 function. XHCI Hand-off This is a workaround for OS without XHCI hand-off support. The XHCI ownership change should claim by XHCI driver. EHCI Hand-off This is a workaround for OS without EHCI hand-off support. The EHCI ownership change should claim by EHCI driver.
Device reset time-out USB mass storage device starts unit command time-out. Device power-up delay Maximum time the device will take before it properly report itself to the host controller. 3.2.2.12 Smart Settings Smart Self Test Enable or disable Run SMART Self test on all HDDs during Post.
Chapter 3 3.2.2.13 Embedded Controller configuration BIOS Operation EC iManager WatchDog IRQ This item allows users to set the irq number of EC watchdog. EC Power Saving Mode This item allows users to set board°Øs power saving mode when off. CPU Shutdown Temperature This item allows users to set the value of CPU shutdown temperature. EC iManager Smart FAN This item allows users to enable or disable smart FAN feature.
3.2.2.14 Intel Smart Connect Technology ISCT Configuration Enable or disable ISCT configuration.
Chapter 3 3.2.2.
Serial Port This item will allow user to enable or disable serial port. Change Settings This item allows user to change the serial port setting. Device Mode This item allows user to change the device mode. 3.2.2.16 Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS).
Chapter 3 3.2.2.17 CPU PPM Configuration BIOS Operation EIST CPU runs at its default speed if disabled; CPU speed is controlled by the operating system if enabled. Turbo Mode This item allows users to enable or disable turbo mode. CPU C3/C6/C7 Report This item allows users to enable or disable CPU C-state support. Config TDP LOCK This item allows users to enable or disable CPU TDP lock function. ACPI T state This item allows users to enable or disable ACPI T state function.
3.2.2.18 Switchable Graphic SG Mode Select This item allows users to select switchable graphics mode.
Chapter 3 3.2.2.19 Sandybridge DTS Configuration BIOS Operation CPU DTS This item allows users to select the ACPI thermal management uses EC reported temperature value function.
3.2.3 Chipset PCI Express Configuration Detail of PCI Express items. USB Configuration Details of USB items. PCH Azalia Configuration Details of PCH azalia items. LAN controller Enables or disables the LAN1/2 controller. LAN option-ROM Enables or disables the LAN1/2 option-ROM. Wake on LAN Enables or disables LAN1/2 wake up from sleep state. High Precision Timer Enables or disables the high precision timer. SLP_S4 Assertion Width This item allows users to set a delay of sorts.
Chapter 3 3.2.3.1 PCI Express Configuration BIOS Operation PCI Express Root Port 1 This item allows users to enable or disable the PCI Express Root Port. ASPM Support This item allows users to enable or disable PEG ASPM. PME SCI This item allows users to enable or disable the PME SCI function. Hot Plug This item allows users to enable or disable the PCI Express hot plug function. PCIe Speed This item allow users to select PCIe speed.
3.2.3.2 USB Configuration XHCI Pre-Boot Driver This item allows user to enable or disable XHCI Pre-boot driver. XHCI Mode This item allows user to enable or disable XHCI Mode. EHCI 1/2 Enables or disables the EHCI controller. USB Ports pre-port Disable Control This item allows users to enable or disable each USB port individually.
Chapter 3 3.2.3.3 PCH Azalia Configuration BIOS Operation Azalia This item allows user to enable or disable azalea device.
3.2.3.4 System Agent (SA) Configuration VT-d This item allows users to enable or disable VT-d.
Chapter 3 3.2.3.5 Graphic Configuration BIOS Operation Primary Display This item allows users to select which graphics controller to use as the primary boot device. Internal Graphics This item allows users to enable or disable IGD. GTT Size This item allows users to select GTT size. Aperture Size This item allows users to select aperture size. DVMT Pre-Allocated This item allows users to select DVMT pre-allocated memory size.
3.2.3.6 NB PCIe Configuration PEG0 - Gen x Select PEG0 speed. Enable PEG This item allows users to enable or disable PEG always.
Chapter 3 3.2.4 Boot BIOS Operation Setup Prompt Timeout This item allows you to change number of seconds to wait for setup activation key. Bootup NumLock State Select the Power-on state for Numlock. Quiet Boot If this option is set to Disabled, the BIOS display normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. GateA20 Active This item allows you to select upon request or Always. Option ROM Messages Sets display mode for option ROM.
3.2.5 Security Select Security Setup from the AIMB-273 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press: Change Administrator / User Password.
Chapter 3 3.2.6 Save & Exit BIOS Operation Save Changes and Exit This item allows you to exit system setup after saving changes. Discard Changes and Exit This item allows you to exit system setup without saving any changes. Save Changes and Reset This item allows you to reset the system after saving the changes. Discard Changes and Reset This item allows you to rest system setup without saving any changes.
AIMB-273 User Manual 62
Chapter 4 4 Software Introduction & Service
4.1 Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
Brightness Control The Brightness Control API allows a developer to access embedded devices and easily control brightness. The Backlight API allows a developer to control the backlight (screen) on/off in embedded devices. 4.2.1.3 Monitor Watchdog A watchdog timer (WDT) is a device that performs a specific operation after a certain period of time if something goes wrong and the system does not recover on its own.
4.2.2 Software Utility BIOS Flash The BIOS Flash utility allows customers to update the flash ROM BIOS version, or use it to back up current BIOS by copying it from the flash chip to a file on customers’ disk. The BIOS Flash utility also provides a command line version and an API for fast implementation into customized applications. Embedded Security ID The embedded application is the most important property of a system integrator.
Chapter 5 Chipset Software Installation Utility 5
5.1 Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-273 are located on the software installation CD. The driver in the folder of the driver CD will guide and link you to the utilities and drivers under a Windows system. Updates are provided via Service Packs from Microsoft*. Note! The files on the software installation CD are compressed.
1. Insert the driver CD into your system's CD-ROM drive. You can see the driver folder items. Navigate to the "Chipset" folder and click "infinst_autol.exe" to complete the installation of the driver. Chapter 5 5.
AIMB-273 User Manual 70
Chapter 6 VGA Setup 6
6.1 Introduction The Intel mobile Core i7-3610QE, Core i5-3610ME, Core i3-3120ME, Celeron B810 CPUs with dual core are embedded with an integrated graphics controller. You need to install the VGA driver to enable the function. Optimized integrated graphic solution: With Intel Graphics Flexible, it supports versatile display options and 32-bit 3D graphics engine.
Chapter 6 VGA Setup 73 AIMB-273 User Manual
AIMB-273 User Manual 74
Chapter 7 7 LAN Configuration
7.1 Introduction The AIMB-273 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Intel 82579LM (LAN1) and 82583V (LAN2)) that offer bandwidth of up to 500 MB/ sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. 7.2 Features Integrated 10/100/1000 Mbps transceiver 10/100/1000 Mbps triple-speed MAC High-speed RISC core with 24-KB cache On-chip voltage regulation Wake-on-LAN (WOL) support PCI Express X1 host interface 7.
Insert the driver CD into your system's CD-ROM drive. Select the LAN folder then navigate to the directory for your OS. Chapter 7 7.
AIMB-273 User Manual 78
Appendix A A I/O Pin Assignments
A.1 USB Header (USB56, USB78) Table A.1: USB Header (USB56) Pin Signal Pin Signal 1 USB0_VCC5 2 USB1_VCC5 3 USB0_D- 4 USB1_D- 5 USB0_D+ 6 USB1_D+ 7 GND 8 GND 9 Key 10 N/C A.2 VGA Connector (VGA1) 5 1 10 6 15 11 Table A.
Table A.3: HDMI1:HDMI Connector Pin Signal Pin Signal 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2- 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1- 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 Reserved 15 SCL 16 SDA 17 DDC/CEC/HEC Ground 18 +5 V Power (max 50 mA) 19 Hot Plug Detect A.4 SPI_CN1: SPI Fresh Card Pin Connector Table A.
A.5 PS/2 Keyboard and Mouse Connector (KBMS1) Table A.5: PS/2 Keyboard and Mouse Connector (KBMS1) Pin Signal 1 KB DATA 2 N/C 3 GND 4 KB VCC 5 KB CLK 6 N/C 7 M_DATA 8 N/C 9 GND 10 M_VCC 11 M_CLK 12 N/C A.6 CPU Fan Power Connector (CPU_FAN1) 3 2 1 Table A.
3 2 1 Table A.7: System Fan Power Connector (SYSFAN1/SYSFAN2) Pin Signal 1 GND 2 +12V PWM 3 DETECT A.8 Power LED & Keyboard Lock Connector (JFP2) You can use an LED to indicate when the single board computer is on. Pin 1 of JFP3 supplies the LED's power, and Pin 3 is the ground. Table A.8: Power LED & Keyboard Lock Connector (JFP2) Pin Function 1 LED power 2 NC 3 GND 4 KEYLOCK# 5 GND 83 AIMB-273 User Manual Appendix A I/O Pin Assignments A.
A.9 Power switch/HDD LED/SMBus/Speaker (JFP1) The single board computer has its own buzzer. You can also connect it to the external speaker on your computer chassis. Table A.9: Power Switch/HDD LED/SMBus/Speaker (JFP1) Pin Signal Pin Signal 1 SPK_P1 2 HDDLED+ 3 PWR 4 NC 5 HDDLED- 6 GND 7 SPK_P3 8 SMB_DAT 9 SYS_RST( +) 10 SPK_P4 11 SMB_CLK 12 SYS_RST( -) A.10 USB/LAN ports (LAN1_USB12/LAN2_USB34) Table A.
Line In Line Out Mic In A.12 Serial ATA0/1 (SATA1 ~ 4) Table A.12: Serial ATA 0/1 (SATA1/SATA2) Pin Signal Pin Signal 1 GND 2 SATA_0TX+ 3 SATA_0TX- 4 GND 5 SATA_0RX- 6 SATA_0RX+ 7 GND 8 A.13 AT/ATX Mode (PSON1) Table A.13: AT/ATX Mode (PSON1) Pin Signal Pin Signal 1 #PSON_SIO (to super IO) 2 #PSON (to power supply) 3 GND A.14 HD Audio Interface (FPAUD1) 1 9 2 10 Table A.
A.15 GPIO Pin Header (GPIO1) Table A.15: GPIO Pin Header (GPIO1) Pin Signal Pin Signal 1 GPIO0 2 GPIO4 3 GPIO1 4 GPIO5 5 GPIO2 6 GPIO6 7 GPIO3 8 GPIO7 9 +5V 10 GND A.16 LVDS Connector: LVDS1 Table A.
17 GND_3 18 GND_9 19 OD2- 20 ED2- 21 OD2+ 22 ED2+ 23 GND_4 24 GND_10 25 OCK- 26 ECK- 27 OCK+ 28 ECK+ 29 GND_3 30 GND_11 31 DDC_CLK 32 DDC_DAT 33 GND_6 34 GND_12 35 NC 36 NC 37 NC 38 NC 39 HPLG 40 VCON A.17 LVDS Power Jumper (JLVDS1) 2 and 4 4 and 6 3 and 4 Table A.17: LVDS Power Jumper (JLVDS1) Pin Signal Pin Signal 1 N/C 2 5V 3 12V 4 VCC_LCD 5 N/C 6 3.3V A.18 LVDS Inverter (INV1) Table A.
A.19 ATX Power Connector (ATXPWR1) Table A.19: ATX Power Connector (ATXPWR1) Pin Signal Pin Signal 1 +3.3 V 11 3.3 V 2 +3.3 V 12 -12 V 3 GND 13 GND 4 +5 V 14 PSON 5 GND 15 GND 6 +5 V 16 GND 7 GND 17 GND 8 POK 18 -5 V 9 5 VSB 19 +5 V 10 12 V 20 +5 V A.20 ATX 12 V connector (ATX12V1) Table A.
Table A.21: HD Digital Audio Interface (SPDIF_OUT1) Pin Signal 1 +5V 3 SPDIF Out 4 GND A.22 Display Port Connector (Top of DP+HDMI1, DP1) Table A.22: Display Port Connector (Top of DP+HDMI1, DP1) Pin Signal Pin Signal 1 Lane 0+ 2 GND 3 Lane 0- 4 Lane 1+ 5 GND 6 Lane 1- 7 Lane 2+ 8 GND 9 Lane 2- 10 Lane 3+ 11 GND 12 Lane 3- 13 Config 1 14 Config 2 15 Auxiliary Chanel+ 16 GND 17 Auxiliary Chanel- 18 Hot Plug 19 Return 20 +3.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
