User manual

AIMB-214 User Manual 4
1.3.7 Mechanical and environmental specifications
 Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)
 Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
 Humidity: 5 ~ 95% non-condensing
 Power supply voltage: +12 V
 Power consumption:
AIMB-214U sku +12 V @1.44 A
AIMB-214D sku +12 V @1.77 A
Measure of the maximum current values with system under minimum load
 Board size: 170 mm x 170 mm (6.69" x 6.69")
 Board weight: 0.365 kg
1.4 Jumpers and Connectors
Connectors on the AIMB-214 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers used to
configure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Connectors
Label Function
FPAUD1 Front Panel audio connector
AUDIO1 Audio connector
CMOS1 CMOS clear ( Default 1-2 )
DIMM1 Memory connector channel
CFAST1 CFast Socket
COM3-6 Serial port: COM RS232
CPU_FAN1 CPU FAN connector(3-pin)
GPIO1 GPIO Header
DCIN1 DC IN
ATX12V1 ATX 12V connector
ATX_5V PS_ON , 5VSB
LVDS1 LVDS1 connector (Internal)
INV1 LVDS1 Inverter Power
JVBR1
LVDS1 Brightness control selector for Analog or Digital
(Default 1-2, Analog)
JLVDS1 LVDS1 voltage jumper (default 1-2, 3.3V)
JLVDS2 LVDS1 12V voltage jumper
VCON1 LVDS1 JEIDA/VESA jumper selection
LVDS2 LVDS2 connector (Internal)
INV2 LVDS2 Inverter Power
JVBR2
LVDS2 Brightness control selector for Analog or Digital (Default 1-
2, Analog)
JLVDS3 LVDS2 voltage jumper (default 1-2, 3.3V)
JLVDS4 LVDS2 12V voltage jumper
VCON2 LVDS2 JEIDA/VESA jumper selection
JFP1+JFP2 Power switch/HDD LED/SMBus/speaker