User Manual AIMB-214 Intel® AtomTM N2600/N2800/ D2550/D2700 1.6/1.8/2.
Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
A Message to the Customer Advantech Customer Services Each and every Advantech product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern.
Declaration of Conformity FCC Class B This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Memory Compatibility AIMB-214 Memory Compatibility List Brand Size Speed Type ECC Vendor PN Memory Result SEC K4B1G0846GBCH9 PASS Transcend 1GB DDR3 SODIMM N 1066 DDR3 TS128MSK64V1U Transcend 2GB DDR3 SODIMM N 1066 DDR3 SEC HCH9 TS128MSK64V1U K4B1G0846D (128x8) PASS Transcend 4GB DDR3 SODIMM N 1066 DDR3 HYNIX TS7KSN28420-1Y H5TQ2G83BFR (256x8) PASS Apacer 4GB DDR3 SODIMM N 1066 DDR3 78.B2GC8.
Ordering Information Part Number CPU DC/SC GbE COM LVDS TPM AIMB-214D-S6A1E Atom D2700 DC2.13GHz 2 6 2,24-bit Yes AIMB-214E-S6A1E Atom D2550 DC1.86GHz 2 6 2,24-bit Yes AIMB-214N-S6A1E Atom N2800 DC1.86GHz 2 6 2,24-bit No AIMB-214U-S6A1E Atom N2600 DC1.6GHz 2 6 2,24-bit No Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase.
Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped: 1x AIMB-214 Intel Atom N2600/N2800/D2550/D2700 Mini-ITX motherboard 2 x SATA HDD cable 2 x SATA Power cable 1 x Serial port cable(1 to 4) 1 x I/O port bracket 1 x Startup manual 1 x Driver CD 1 x Warranty card 1 x CPU cooler (for Atom D2700/D2550 only) If any of these items are missing or damaged, contact your distributor or sales representative immediately.
AIMB-214 User Manual viii
Contents Chapter 1 General Information ............................1 1.1 1.2 1.3 Introduction ............................................................................................... 2 Features .................................................................................................... 2 Specifications ............................................................................................ 3 1.3.1 System .................................................................................
2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 Serial ATA Interface (SATA1/2) .............................................................. 20 PCI .......................................................................................................... 21 Front Panel Audio Connector (FPAUDIO1) ............................................ 21 ATX 12V Power Connector (ATX12V1) .................................................. 22 SPI Flash connector(SPI_CN1) ........................................................
B.1 B.2 B.3 B.4 B.5 B.6 B.7 B.8 B.9 B.10 B.11 B.12 B.13 B.14 B.15 B.16 B.17 B.18 B.19 B.20 USB Header (USB56) ............................................................................. 70 Table B.1: USB Header (USB56)............................................... 70 VGA Connector (VGA1) .......................................................................... 70 Table B.2: VGA Connector (VGA1) ........................................... 70 RS-232 Interface (COM2/4/5/6) ..............................
AIMB-214 User Manual xii
Chapter 1 1 General Information
1.1 Introduction The AIMB-214 is designed with the Intel® Atom™ N2600/N2800/D2550/D2700 and the NM10 forindustrial applications that require both performance computing and enhanced powermanagement capabilities. The motherboard has on board CPU Intel® Atom™ N2600/N2800/D2550/D2700 dual core 1.6/1.86/1.86/2.13 GHz and DDR3 1066MHz up to 2/4 GB. The AIMB-214 has rich I/O connectivity with up to six USB 2.0 ports ports and six COM ports integrated in a standard 170 x 170 mm form factor.
1.3.1 System 1.3.2 Memory RAM: Up to 2 GB/ 4GB in 1 slot 204-pin SODIMM sockets. Supports single channel DDR3 1066 MHz SDRAM 1.3.3 Input/Output PCI bus: 1 PCI slot Serial ports: Six serial ports, one is RS-232/422/485 and five of RS-232 serial ports Keyboard and PS/2 mouse connector: Supports one standard PS/2 keyboard, one standard PS/2 mouse (On board 6pin wafer box) USB port: Supports up to six USB 2.
1.3.7 Mechanical and environmental specifications Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU) Storage temperature: -40 ~ 85° C (-40 ~ 185° F) Humidity: 5 ~ 95% non-condensing Power supply voltage: +12 V Power consumption: AIMB-214U sku +12 V @1.44 A AIMB-214D sku +12 V @1.77 A Measure of the maximum current values with system under minimum load Board size: 170 mm x 170 mm (6.69" x 6.69") Board weight: 0.365 kg 1.
Power LED and Keyboard lock JSETCOM2 RS-232/422/485 Jumper setting JSETCOM6 COM6 5V/12V Jumper setting PCI1 PCI connector KBMS1 PS/2 Keyboard and Mouse external connector KBMS2 PS/2 Keyboard and Mouse internal connector LAN1_USB12 LAN1 / USB port 1, 2 LAN2_USB34 LAN2 / USB port 3, 4 MINI_CARD Mini PCI express connector PCI PCI slot PSON1 AT(1-2) / ATX(2-3) ( Default 2-3 ) SATA1 Serial ATA data connector 1 SATA2 Serial ATA data connector 2 SATA_PWR1 SATA POWER SATA_PWR2 SATA POWER
1.5 Board layout: Jumper and Connector Locations Figure 1.1 Jumper and Connector Location Figure 1.
CRT Chapter 1 1.6 AIMB-214 Board Diagram VGA LVDS/eDP 24-bit LVDS Chrontel 7511 HDMI LVDS Intel D2700/N2600 Channel A DDR3 1066 MHz 1 Cfast type I/II JMB362 PCIe x1 2 SATA ports 300 MB/s PCIe x1 GbE LAN1: Intel 82574L/82583V colay PCIe x1 GbE LAN2: Intel 82583V NM10 6 USB Ports USB 2.
1.7 Safety Precautions Warning! Always completely disconnect the power cord from chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the motherboard. Modern electronic devices are very sensitive to electrostatic discharges.
This section provides instructions on how to configure your motherboard by setting the jumpers. It also includes the motherboards's default settings and your options for each jumper. 1.8.1 How to Set Jumpers 1.8.2 CMOS Clear (CMOS1) The AIMB-214 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed.
1.8.3 COM2 RS 232/422/485 Mode Selector (JSETCOM2) Users can use JSETCOM2 to select among RS 232/422/485 modes for COM2. The default setting is RS 232. RS232* RS422 RS485 Table 1.3: COM2 RS 232/422/485 Mode Selector (JSETCOM2) Function Jumper Setting *RS232 (5-6) + (7-9) + (8-10) + (13-15) + (14-16) closed RS422 (3-4) + (9-11) + (10-12) + (15-17) + (16-18) closed RS-485 (1-2) + (9-11) + (10-12) + (15-17) + (16-18) closed *: Default 1.8.4 JLVDS1 and JLVDS3: LCD Power 3.3 V/5 V Selector Table 1.
Chapter 1 1.8.5 PSON1: ATX, AT Mode Selector Table 1.5: PSON1: ATX, AT Mode Selector Closed Pins Result 1-2 AT Mode 2-3* ATX Mode *Default 1 ATX Mode 2-3 closed AT Mode 1-2 closed 1.8.6 JWDT1+JOBS1: Watchdog Reset and OBS Alarm Table 1.
AIMB-214 User Manual 12
Chapter 2 Connecting Peripherals 2
2.1 Introduction You can access most of the connectors from the top of the board as it is being installed in the chassis. If you have a number of cards installed or have a packed chassis, you may need to partially remove the card to make all the connections. 2.2 USB Ports (LAN1_USB12/LAN2_USB34/USB56) The AIMB-214 provides up to six USB ports. The USB interface complies with USB Specification Rev. 2.0 supporting transmission rate up to 480 Mbps and is fuse protected.
10 15 1 6 11 The AIMB-214 includes VGA and HDMI interface that can drive conventional VGAand HDMI displays. VGA1 is a standard 15-pin D-SUB connector commonly used forVGA. HDMI is HDMI connector for HDMI signals output. Pin assignments for VGAare detailed in Appendix B. 15 AIMB-214 User Manual Connecting Peripherals 5 Chapter 2 2.
2.4 Serial Ports (COM1~COM6) COM12 AIMB-214 supports six serial ports. 1 of RS-232/422/485 is for COM3 and COM6; 5 of RS-232 are for COM1, COM2, COM4, COM5 and COM6. The user can use JSETCOM2 to select among RS 232/422/485 modes for COM2. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network. The IRQ and address ranges for both ports are fixed.
5 4 3 2 1 On board 6-pin wafer box connector, supports one standard PS/2 keyboard, one standard PS/2 mouse. 2.6 CPU Fan Connector (CPU_FAN1) 1 2 3 If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. 17 AIMB-214 User Manual Connecting Peripherals 6 Chapter 2 2.
2.7 System FAN Connector (SYSFAN1) 1 2 3 If a fan is used, this connector supports cooling fans of 500 mA (6 W) or less. 2.8 Front Panel Connectors (JFP3/JFP1+JFP2) There are several external switches to monitor and control the AIMB-214.
If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to ((JFP1+JFP2/ PWR_SW)), for convenient power on and off. 2.8.2 Reset (JFP1+JFP2/ RESET) Many computer cases offer the convenience of a reset button. Connect the wire for the reset button. You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is active. 2.8.
2.9 Line In, Line Out, Mic In Connector (AUDIO1) Line In Line Out Mic In 2.10 Serial ATA Interface (SATA1/2) AIMB-214 features a high performance Serial ATA interface (up to 300 MB/s) which eases cabling to hard drives with long, thin cables.
Chapter 2 2.11 PCI 2.12 Front Panel Audio Connector (FPAUDIO1) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 (optional) audio standard. Connect this connectorwith the front panel audio I/O module cable. 21 AIMB-214 User Manual Connecting Peripherals The AIMB-214 provides 1 x PCI slot.
2.13 ATX 12V Power Connector (ATX12V1) This connector is for an ATX Micro-Fit power supply. The plugs from the power supply are designed to fit these connectors in only one direction. Determine the proper orientation and push down firmly until the connectors mate completely. 2.14 SPI Flash connector(SPI_CN1) The SPI flash card pin header may be used to flash BIOS if the AIMB-214 cannot power on.
Connecting Peripherals Note! Chapter 2 2.15 LCD Inverter Connector (INV1/INV2) Signal Description Signal VR Signal Description Vadj=0.75 V (Recommended: 4.
2.16 LVDS Connector (LVDS1/LVDS2) 2.
Chapter 3 BIOS Operation 3
3.1 Introduction AMI BIOS has been integrated into many motherboards, and has been very popular for over a decade. People sometimes refer to the AMI BIOS setup menu as BIOS, BIOS setup or CMOS setup. With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning special features on or off. This chapter describes the basic navigation of the AIMB-214 setup screens. 3.
Press to enter AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. Chapter 3 3.2.1 Main Menu BIOS Operation The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can. The right frame displays the key legend. Above the key legend is an area reserved for a text message.
3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-214 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.
Chapter 3 3.2.2.1 PCI Subsystem Settings BIOS Operation PCI Latency Timer PCI operation delay to ensure the stability of the action between the device and the host. VGA Palette Snoop This item allows you to enable or disable PCI cards that do not contain their own VGA color palette to examine the video cards palette and mimic it. PERR# Generation This item allows you to enable or disable PCI device to generation PERR#.
3.2.2.2 ACPI Setting Enable ACPI Auto Configuration This item allows users to enable or disable BIOS ACPI auto configuration. Enable Hibernation Enable or disable Intel processor Hibernation function. ACPI Sleep State This item allow user to select ACPI sleep state. Lock Legacy Resources This item allows users to lock legacy devices' resources. S3 Video Report Enable or disable video repost.
Chapter 3 3.2.2.3 Trusted Computing BIOS Operation Security Device Support Disable/Enable BIOS to support for security devices. 3.2.2.4 Wake System Wake system with Fixed Time Disable/Enable system wake on alarm event.
3.2.2.5 CPU Configuration Hyper-Treading This item allows users to enable or disable Intel Hyper Threading technology. Execute Disable Bit This item allows users to enable or disable the No-Execution page protection.
Chapter 3 3.2.2.
3.2.2.7 USB configuration Legacy USB support Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected. EHCI Hand-off This is a workaround for OS without EHCI hand-off support. The EHCI ownership change should claim by EHCI driver. USB transfer time-out Time-out value for control, bulk, and interrupt transfers. Device reset time-out USB mass storage device starts unit command time-out.
Chapter 3 3.2.2.8 Second Super IO Configuration BIOS Operation Serial Port Configuration These items allow users to configure serial port 0, 2, 4, 5, 6. Serial port 2 (COM3) support auto flow control function.
3.2.2.9 Serial Port 2~6 Configuration Serial Port These items allow users to enable or disable serial port 2(COM3). Change Settings These items allow users to change the serial port2 (COM3) setting. RS485 AUTO FLOW These items allow users to enable or disable rs485 auto flow control function of serial port2 (COM3).
Chapter 3 3.2.2.10 Super IO Configuration BIOS Operation Serial Port 1,3 These items allow users to set parameters of serial ports 1. Watchdog mode These items allow users to select watch dog mode.
3.2.2.11 Digital IO Configuration Digital I/O pin 1~8 These items allow users to set GPIO input or output.
Chapter 3 3.2.2.12 PC Health Status BIOS Operation Smart Fan Function This item displays all CPU/system temperature, fan speed, power management status. CPU Warning Temperature These items allow users to enable or disable CPU warning temperature function. ACPI Shutdown Temperature These items allow users to enable or disable ACPI Shutdown temperature function.
3.2.2.13 Smart Fan Mode Configuration System Smart Fan Mode This item allows user to enable or disable system smart fan function. CPU Smart Fan 0 Mode This item allows user to enable or disable CPU smart fan function. 3.2.2.
Console Redirection This item allows user to enable or disable console redirection function. 3.2.2.15 PPM Configuration Chapter 3 BIOS Operation CPU C state report This item allows users to enable or disabled CPU C state report to OS. Enhanced C state report This item allows users to enable or disabled Enhanced CPU C state.
3.2.3 Chipset Host Bridge Detail of North Bridge items. South Bridge Details of South bridge items.
Chapter 3 3.2.3.1 Host Bridge / Intel IEGD Configuration BIOS Operation Memory Information Memory Frequency and timing setting information. 3.2.3.
MRC Fast Boot This item allows user to enable or disable MRC fast boot function. 3.2.3.3 Intel IGD Configuration Primary IGFX Boot Display This item allows users to select the video device which will be activated during POST. Secondary IGFX Boot Display This item allows users to select which output device will be secondary during POST. Active LFP This item allows users to select the active LFP configuration. LVDS1 panel type This item allows users to change the LVDS1 panel resolution.
Chapter 3 3.2.3.4 SB Configuration BIOS Operation Azalia Configuration Enable or disable SB azalia controller. Select USB mode Select USB mode by controllers or ports.
3.2.3.5 PCI Express Port Mini PCI Express port Enable or disable Mini PCI Express port Automatic ASPM This item Enables or disables control of active state power management on both NB and SB side of DMI link.
Chapter 3 3.2.4 Boot BIOS Operation Setup Prompt Timeout This item allows you to change number of seconds to wait for setup activation key. Bootup NumLock State Select the Power-on state for Numlock. Quiet Boot If this option is set to Disabled, the BIOS display normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. GateA20 Active This item allows you to select upon request or Always. Option ROM Messages Sets display mode for option ROM.
3.2.5 Security Select Security Setup from the AIMB-214 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press : Change Administrator / User Password.
Chapter 3 3.2.6 Save & Exit BIOS Operation Save Changes and Exit This item allows you to exit system setup after saving changes. Discard Changes and Exit This item allows you to exit system setup without saving any changes. Save Changes and Reset This item allows you to reset the system after saving the changes. Restore Defaults This item allows you to restore/load default values for all the options.
AIMB-214 User Manual 50
Chapter 4 4 Software Introduction & Service
4.1 Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft® Windows® embedded technology." We enable Windows® Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (hardware suppliers, system integrators, embedded OS distributors) for projects.
Brightness Control The Brightness Control API allows a developer to access embedded devices and easily control brightness. The Backlight API allows a developer to control the backlight (screen) on/off in embedded devices. 4.2.1.3 Monitor Watchdog A watchdog timer (WDT) is a device that performs a specific operation after a certain period of time if something goes wrong and the system does not recover on its own.
4.2.2 Software Utility BIOS Flash The BIOS Flash utility allows customers to update the flash ROM BIOS version, or use it to back up current BIOS by copying it from the flash chip to a file on customers’ disk. The BIOS Flash utility also provides a command line version and an API for fast implementation into customized applications. Embedded Security ID The embedded application is the most important property of a system integrator.
Chapter 5 Chipset Software Installation Utility 5
5.1 Before You Begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-214 are located on the software installation CD. The driver in the folder of the driver CD will guide and link you to the utilities and drivers under a Windows system. Updates are provided via Service Packs from Microsoft*. Note! The files on the software installation CD are compressed.
Chapter 6 VGA Setup 6
6.1 Introduction To benefit from the Intel® Atom N2600/N2800/D2550/D2700 integrated graphics controller, you need to install the graphic driver. 6.2 Windows 7 Note! Before installing this driver, make sure the CSI utility has been installed in your system. See Chapter 5 for information on installing the CSI utility. Insert the driver CD into your system's CD-ROM drive. You can see the driver folders items. Navigate to the "Graphic" folder and click "setup.
Chapter 7 7 LAN Configuration
7.1 Introduction The AIMB-214 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Intel 82583V(LAN1)) and 82574L (LAN2)) that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. 7.2 Features Integrated 10/100/1000 Mbps transceiver 10/100/1000 Mbps triple-speed MAC High-speed RISC core with 24-KB cache On-chip voltage regulation Wake-on-LAN (WOL) support PCI Express X1 host interface 7.
Appendix A A Programming the Watchdog Timer
A.1 Programming the Watchdog Timer The AIMB-214's watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to program it. A.1.1 Watchdog Timer Overview The watchdog timer is built into the super I/O controller W83627DHG-P.
Appendix A Programming the Watchdog Timer Unlock W83627DHG-P Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog timer Lock W83627DHG-P 63 AIMB-214 User Manual
Table A.1: Watchdog Timer Registers Address of Register (2E) Attribute Read/Write Value (2F) & description 87 (hex) ----- Write this address to I/O address port 2E (hex) twice to unlock the W83627DHG-P. 07 (hex) write Write 08 (hex) to select register of watchdog timer. 30 (hex) write Write 01 (hex) to enable the function of the watchdog timer. Disabled is set as default. F5 (hex) write Set seconds or minutes as units for the timer. Write 0 to bit 3: set second as counting unit.
1. Enable watchdog timer and set 10 sec.
;----------------------------------------------------------Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Set minute as counting unit Mov al,0f5h Out dx,al Inc dx In al,dx Or al,08h Out dx,al ;---------------------------------------------------------
67 AIMB-214 User Manual Appendix A Programming the Watchdog Timer Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al Inc dx In al,dx Or al,80h Out dx,al ;----------------------------------------------------------Dec dx ; Lock W83627DHG-P Mov al,0aah Out dx,al 4.
;----------------------------------------------------------Dec dx ; Lock W83627DHG-P Mov al,0aah Out dx,al 5.
Appendix B B I/O Pin Assignments
B.1 USB Header (USB56) Table B.1: USB Header (USB56) Pin Signal Pin Signal 1 USB0_VCC5 2 USB1_VCC5 3 USB0_D- 4 USB1_D- 5 USB0_D+ 6 USB1_D+ 7 GND 8 GND 9 Key 10 GND B.2 VGA Connector (VGA1) 5 1 10 6 15 11 Table B.
Table B.
B.4 RS-232/422/485 Setting Interface (JSETCOM2) Table B.4: RS-232/422/485 Setting Interface (JSETCOM2) Pin Signal Pin Signal 1 UART3_RXD 2 RXD485 3 UART3_RXD 4 RXD422 5 UART3_RXD 6 RXD232 7 DDCD2# 8 TTXD2 9 JDDCD2# 10 JTTXD2 11 TXD485# 12 RXD485P 13 RRXD2 14 DDTR2# 15 JRRXD2 16 JDDTR2# 17 TXD485P 18 RXD485# B.5 SPI_CN1: SPI Fresh Card Pin Connector 1 2 7 8 Table B.
6 5 4 3 2 1 Table B.6: PS/2 Keyboard and Mouse Connector (KBMS2) Pin Signal 1 O_KB_CLK_L 2 O_KB_DATA_L 3 O_MS_DATA_L 4 GND 5 +PS2VCC 6 O_MS_CLK_L B.7 CPU Fan Power Connector (CPU_FAN1) 1 2 3 Table B.7: CPU Fan Power Connector (CPU_FAN1) Pin Signal 1 GND 2 +12 V 3 DETECT B.8 System Fan Power Connector (SYS_FAN1) 1 2 3 Table B.8: System Fan Power Connector (SYS_FAN1) Pin Signal 1 GND 2 +12 V 3 DETECT 73 AIMB-214 User Manual Appendix B I/O Pin Assignments B.
B.9 Power LED & Keyboard Lock Connector (JFP3) You can use an LED to indicate when the single board computer is on. Pin 1 of JFP3 supplies the LED's power, and Pin 3 is the ground. Table B.9: Power LED & Keyboard Lock Connector (JFP3) Pin Function 1 LED power 2 NC 3 GND 4 KEYLOCK# 5 GND B.10 Power switch/HDD LED/SMBus/Speaker (JFP1+JFP2) The single board computer has its own buzzer. You can also connect it to the external speaker on your computer chassis. Table B.
Table B.11: USB Port Pin Signal Pin Signal 1 VCC 3 Data0+ 2 Data0- 4 GND Table B.12: Ethernet 10/100 Mbps RJ-45 Port Pin Signal Pin Signal 1 XMT+ 5 N/C 2 XMT- 6 RCV- 3 RCV+ 7 N/C 4 N/C 8 N/C B.12 Line In, Line Out, Mic In Connector (AUDIO1) Line In Line Out Mic In B.13 Serial ATA0/1 (SATA1/2) Table B.
B.14 AT/ATX Mode (PSON1) Table B.14: AT/ATX Mode (PSON1) Pin Signal Pin Signal 1 VCCATX 2 VCCATX 3 GND 1 9 B.15 Front Panel Audio connector (FPAUDIO1) Table B.15: Front Panel Audio connector (FPAUDIO1) Pin Signal Pin Signal 1 MIC2-L_R 2 AGND 3 MIC2-L_R 4 MIC2-R_R 5 N62807151 6 LINE2-R_R 7 MIC2-JD 8 FRONT-IO-SENSE 9 LINE2-L_R 10 LINE2-JD B.16 GPIO Pin Header (GPIO1) Table B.
Table B.
B.18 LVDS Power Jumper (JLVDS1 and JLVDS2) JLVDS1 for 3.3V LVDS panel JLVDS1 for 5V LVDS panel JLVDS2 for 12V LVDS panel * default setting Table B.18: LVDS Power Jumper Pin Signal 1 VCC3 2 VCC_LCD 3 VCC B.19 LVDS Inverter (INV1/INV2) Table B.19: LVDS Inverter (INV1/INV2) Pin Signal 1 +12V 2 GND 3 BL_EN 4 BL_CLT 5 +5V B.20 ATX 12 V Connector (ATX12V_1) Table B.
Appendix B I/O Pin Assignments AIMB-214 User Manual 79
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
