User manual

51 AIMB-213 User Manual
Chapter 4 Software Introduction & Service
4.2.1.2 Display
4.2.1.3 Monitor
4.2.1.4 Power Saving
Brightness Control
The Brightness Control API allows a developer to access
embedded devices and easily control brightness.
Backlight
The Backlight API gives the developer on/off control of the
backlight (screen) in embedded devices.
Watchdog
A watchdog timer (WDT) is a device that performs a specific
operation after a set period of time if something goes wrong
and the system does not recover on its own. A watchdog
timer can be programmed to perform a warm boot (restarting
the system) after a certain number of seconds.
Hardware Monitor
The Hardware Monitor (HWM) API is a system health super-
vision API that inspects condition indexes such as fan speed,
temperature, and voltage.
CPU Speed
Makes use of Intel
®
SpeedStep technology to save power
consumption. The system can automatically adjust the CPU
speed depending on loading.
System Throttling
Refers to a series of methods for reducing power consump-
tion in computers by lowering the clock frequency. This API
allows the user to change clock frequency setting from
87.5% to 12.5%.