User manual

AIMB-213 User Manual 4
1.3.7 Mechanical and environmental specifications
Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)
Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
Humidity: 5 ~ 95% non-condensing
Power supply voltage: +12 V
Power consumption:
AIMB-213N sku +12 V @ 3.09 A
AIMB-213D sku +12 V @ 3.43 A
Measure of the maximum current values with system under maximum load
Board size: 170 mm x 170 mm (6.69" x 6.69")
Board weight: 0.365 kg
1.4 Jumpers and Connectors
Connectors on the AIMB-213 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers used to
configure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label Function
JFP1 Power LED and Keyboard lock
JFP1+JFP2 Power Switch/Reset Switch/HDD LED/SM Bus/Speaker
CMOS1 CMOS clear (Default 1-2)
JLVDS1 Voltage 3.3 V / 5 V selector for LVDS1 connector (Default 1-2, 3.3 V)
JLVDS2 Voltage 12 V selector for LVDS1 connector
PSON1 AT(1-2) / ATX(2-3), (Default 2-3)
JSETCOM2 COM2 RS232/422/485 Jumper Setting
JWDT1 Watchdog Reset
JOBS1 H/W Monitor Alarm
Table 1.2: Connectors
Label Function
USB56 USB port 5, 6 (on board)
USB78 USB port 7, 8 (on board)
VGA1+DVI1 VGA/DVI connector
COM12
Serial port: COM1 (RS232) and COM2 (RS232, RS422 and
RS485)
COM3456 Serial port connector:(RS232)
KBMS1 Internal PS/2 Keyboard and Mouse connector
CPUFAN1 CPU FAN connector(3-pin)
SYSFAN1 System FAN connector(3-pin)
LAN1_USB12 LAN1 / USB port 1, 2
LAN2_USB34 LAN2 / USB port 3, 4
CF1 CF Socket